-
Day 1- Part 1- Introduction
26:41
-
Day 1- Part 2- Introduction to Structural Systems and SDC
39:09
-
Day 2- Part 1- Seismic Design Category and Structural Systems
40:57
-
Day 2- Part 2- Define Grid and Story Data
30:02
-
Day 3- Part 1- Define Material Properties
47:19
-
Day 3- Part 2- Define of Beam and Column Sections
41:13
-
Day 4- Part 1- Define Slab and Wall Sections
43:08
-
Day 4- Part 2- Draw Columns
30:34
-
Day 5- Part 1- Draw Concrete Walls
39:13
-
Day 5- Part 2- Draw Beams and Slabs
34:24
-
Day 6- Part 1- Draw Stairs and Define Diaphragms
50:56
-
Day 6- Part 2- Define Gravity Load Patterns
49:28
-
Day 7- Part 1- Define Lateral Load Patterns
42:32
-
Day 7- Part 2- Define Load Combinations, Mass Source, and P-Δ Effects
49:26
-
Day 8- Part 1- Floor Finishing, Walls and Stairs Dead Loads
29:36
-
Day 8- Part 2- Mass Loads
33:06
-
Day 9- Part 1- Assign Dead and Live Loads
51:43
-
Day 9- Part 2- Assign Snow and Elevator Loads
37:33
-
Day 10- Part 1- Assign Joint Restraints, Property and Stiffness Modifiers
42:02
-
Day 10- Part 2- Analyzing Settings and Run Analysis
28:51